Applying The Arm Cuff - Omron M3 Intellisense Manual De Instrucciones

7051_E.book Page 16 Friday, July 15, 2005 4:36 PM
3.Using the Unit
3.2

Applying the Arm Cuff

Be sure to wrap the arm cuff correctly so that you get accurate
results.
Measurements can be taken in light clothing. However, please
remove thick clothes, such as sweaters, before taking a
reading.
1.
Insert the air plug into the air jack on
the left side of the main unit.
2. Put your left arm through the cuff
loop.
The air tube should run down the
inside of your forearm and be in line
with your middle finger.
Note: If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth cloth
should be on the inside of the
cuff loop.
16