Time Setup - James TVJ LED 39 F3300F Manual De Funcionamiento

MTS: select a type from the list by using the left or
right direction button: Stereo, SAP, Mono.
appears only for TV mode. For AV/CMP mode,
Sound Mode appears.
Balance: use the left or right direction button to
balance the sound between the left and right
speakers.
Bass Boost: Decreases or increases the bass of the
TV using the left or right direction button.
Sound Surround: use the left or right direction
button to switch On or Off.
Equalizer: use the left and right direction button to
toggle among Off, Rock, Pop, Live, Dance, Techno,
Classic, and Soft.
Digital Auto Output: use the left and right direction
button to select PCM, off.
Note: When Digital Auto Output is off, SPDIF
Delay option is not available.
SPDIF Delay: this option is used to synchronize
sound with the picture of the set. If the sound is
slower/quicker than the action of the picture, you can
use left/right direction button to turn down/up the
numerical value.
Auto Volume Control turns on this option to keep
the same sound level for all channels

Time Setup

This menu allows you to set the time zone on your
TV set, to programme an automatic turn-off or wake-
up timer.
Display main menu by pressing Menu. Select Time
Setup and press the OK button to confirm.
Time Shifting Mode: Allows you to record the TV
programme so that you won't miss the favourite part
even if you go out. Before you use the function,
connect a USB device to the TV first. For the first
time, you should do the disk setup for the USB
device.
1. Select Time Setup > Time Shifting Mode .
2. Press the left or right direction button to select On
to switch on the time shift function, then press Exit
to close the menu.
3. Press Option on the remote control and select
Time shift, then press OK to confirm.
4. Follow the directions on the screen to do the setup.
5. After the disk setup is done, press Option and
select Time shift.
6. Press OK to display the time shift menu.
- Press the red button to pause the picture and
This option Begin the time shift.
- Press the red button to play the recorded part.
- When the time shift menu disappears and only
the timing of the time shift remains on the
screen, you can press the red button or OK to
call out the time shift Menu.
- Press the green button to fast backward or the
yellow button to fast forward.
- Press the blue button to quit the time shift
function.
Notes:
- Before you plug the USB device to TV, make
sure you have backed up the data in the device
to avoid the unusual performance make your
important data lost.
- We recommend you use a USB device with the
free file size bigger than 1Gb and disk speed
faster than 5.0M/sec.
- The bigger file size for time shift, the longer you
can record the programme.- If changing
channel in time shifting, a message prompts to
let you select Yes or No. You can select Yes to
exit the time shift function and execute the
channel change.
Time Setup: Select Time Setup option and press
the OK button to confirm. The options are as below:
Time zone: use the left or right direction button to
select the local zone.
Time: press the OK or right direction button to
display time its options:
Auto-synchronization: use the left or right
direction button to select On or Off. If On
selected, the TV will get the time automatically
from DTV signals, and the Time item cannot be
adjusted. If you select Off, you should set time at
Time item. Highlight Time, use the left or right
direction button to select input space, enter the
current time using the digit keys.
Note: If Off selected, the time set in Time option
13
Advanced Functions
Time Setup
Time Zone
Time
Sleep Timer
Select
Back
Exit
will not be memorized when turning on the
TV next time, and the TV 's time will start
from the default.
As broadcaster
20 minutes