Comelit 43LEC000 Manual Tecnico página 5

6.2.2 – Setting the date and time (SET DATE/TIME)
Attention: The jumper for storing the time and date of the events must be set – see position 6 as
shown at item 4!
In normal operation mode, press the ENTER button (
ARROW button ( ). The display shows:
Press the ENTER button (
following format: DDMM 'YY HH: MM:SS (day/month/year hour/minutes/seconds).
A "VV" symbol appears over the set field. The value of every field can be increased with pressing the UP
ARROW button ( ) or decreased with DOWN ARROW button (
confirm the entered value – the symbol "VV" moves over the next field, and so on till the end of the
display to the field for setting the seconds.
The user can reject the entered values at any time with pressing the CANCEL button (
returns back to normal operation mode without saving the date and time.
To confirm and save the entered date and time press the ENTER button (
over the field for setting the seconds. The module returns back to normal operation mode with the date
and time.
6.2.3 – Language setting (LANGUAGE)
In normal operation mode, press the ENTER button (
ARROW button ( ) twice. The display shows:
Press the ENTER button (
) and UP ARROW (
ENTER button ( ). The module returns back in normal operation mode.
) to enter the submenu for setting the date and time. The fields have the
) to enter the submenu for setting the language. Use the DOWN ARROW (
) buttons to select the new language. Confirm your choice with pressing the
43LEC000 – Tecnical Manual
) to enter the menus mode. Press the DOWN
). Press the ENTER button (
), when the symbol "VV" is
) to enter the menus mode. Press the DOWN
) to
). The module
5