Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Step One
·
Use appropriate mounting specification based on the size and the orientation of your Sans board
NOTE: You may drill holes in the support bracket to install into the wall stud for strongest support.Anchor
into wall studs as often as possible. Mounting heights are recommendations only.
Horizontal Orientation
Product
Recommended Mounting Heights
Sans 2420
Sans 1830
A = 77" (1956 mm)
Sans 1220
B = 35-15/16" (913 mm)
B
A
A
B
B
Sans 2420
A
A
Vertical Orientation
Recommended Mounting Heights
C = 92 29/32" (2360 mm)
E = 69 11/16" (1770 mm)
D = 41 11/32" (1050 mm)
F = 29 23/32" (755 mm)
D
F
C
E
D
F
D
F
C
E
D
F
Sans 1830
Sans 2420
Doc # 81815 | Rev B | Page 6 of 32
# of Studs
Weight (kg/lb)
4
44 kg/97.0 lb
3
37 kg/81.5 lb
2
25 kg/55.1 lb
B
B
A
B
Sans 1830
Sans 1220
A
Product
# of Studs
Weight (kg/lb)
Sans 2420
2
44 kg/ 97.0 lb
Sans 1830
2
37 kg/81.5 lb
Step Two
·
Level brackets and mark holes onto wall. Refer to recommended mounting heights noted on page 6.
Step Three
·
Remove brackets from wall and install wall anchors in all hole locations that are not over a stud.
Anchor may not be needed for stud.
marked hole
Doc # 81815 | Rev B | Page 7 of 32
brackets
anchors
Tabla de contenido
