Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
3
Safety Requirements
4
Handling + Storing of Panels
5
Requiremed Materials + Equipment
6
Installation
11
Warranty
Doc # 81815 | Rev B | Page 2 of 32
Safety Requirements
a
CeramicSteel Sans - Wall Mounted Frameless
3
Dry Erase Board, Non-Seismic Applications
The building's Engineer of Record must be
consulted to determine if there are any seismic
requirements.
Doc # 81815 | Rev B | Page 3 of 32
Verify Wall Construction
CAUTION! Adequate wall construction is
required to support the weight of the board.
Minimum wall construction must be capable
of supporting weight amounts listed in Table
1 on page 6.
Minimum Required Wall Construction
Drywall with metal studs:
•
Must be atleast 25 ga. (0.018" or .5 mm thick) 33
ksi steel studs 38 mm x 89 mm (1.5" x 3.5")
•
Studs on maximum 610 mm (24") centers
•
Must be atleast 16 mm (5/8") thick Type X
gypsum drywall for the US or 12 mm (1/2") for EU
•
32 mm (#6 x 1-1/4") drywall screws on 305 mm
(12") centers
Drywall with wooden studs:
•
Stud grade SPF, DF-L or Hem-Fir 38 mm x 89
mm (1.5" x 3.5")
•
Studs on 610 mm (24") centers
•
Must be atleast 16 mm (5/8") thick Type X
gypsum drywall for the US or 12 mm (1/2") for EU
•
32 mm (#6 x 1-1/4") drywall screws on 305 mm
(12") centers
Tabla de contenido
