Fellowes Callisto 95 Manual De Usario página 4

ENGLISH
LAMINATOR CONTROLS
A On / off switch
B
Standby button
C Pouch selection buttons (
D Reverse button (
E Carry handle
CAPABILITIES
Performance
Entry width
Pouch thickness (min)
Pouch thickness (max)
Warm up time (estimate)
Cool down time
Lamination speed (+/- 5%)
Number of rollers
Ready indication
Auto Reverse/Reverse
Clear Path / Anti-jam engine
Cold lamination
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
FEATURES & TIPS
Pouch Tracking System
This feature will detect and alert the user if there is a mis-feed or the document
has not gone completely through the machine in normal operating time, and
automatically revers the document until the jam is cleared.
'Reverse' function
To remove or re-align a pouch during lamination, press and hold the reverse
button until the pouch is ejected from the entry slot.
'Hot Swap' function
The Hot Swap function enables the user to instantly switch between thick and
thin pouch settings without any processing delays.
For best results, use Fellowes ® brand thermal pouches:
3 Mil, 4 Mil, 5 Mil and 5 Mil Cold Pouches.
5
E
, 3 Mil, 4 Mil, 5 Mil)
)
125 = 12.5" / 318mm
95 = 9.5" / 240mm
3 Mil (per side)
5 Mil (per side)
1 minute
60-90 minutes
up to19"
2
Light & beep
Yes/Yes
Yes
Yes
F Pouch / document entry slot
G
Entry support shelf
H Pouch / document exit
I Cooling system vents
J Exit tray
Technical Data
Voltage / Frequency / Current(Amps)
Wattage
Dimensions (HxWxD)
Net weight
Max document thickness
(laminating capacity)
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot
settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
For self-adhesive (cold pouches) only use the cold setting.
This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
Always put the item to be laminated into the appropriate sized pouch.
Always test laminate with a similar size and thickness before final process.
Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
If required, trim excess material from around the item after lamination and
cooling.
125 = 110-120V AC, 60Hz, 6.10A
95 = 110-120V AC, 60Hz, 6.10A
125 = 720 Watts
95 = 720 Watts
125 = 4.3" x 22.4" x 6.1"
95 = 4.3" x 17.7" x 5.7"
125 = 4.6lb
95 = 4lb
.021" / 0.55 mm