Light Bulbs - Best PIK33 Instrucciones De Instalación

19. LIGHT BULBS

This insert must use shielded halogen lamps (120 V, 50 W, MR16 or PAR16 with GU10 base), included.
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal
injury, only install shielded halogen lamps. Also, never install a cool beam, a dichroïc lamp, a lamp not suitable
for use in recessed luminaires or identified for use in enclosed fixtures.
1. Install the lamps by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads
from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
20. INSTALL BAFFLE FILTERS
Remove protective plastic film covering the baffle filters before installing them.
NOTE: Assemble the metal handles to the filters, using no. 8-32 x 1/4" screws provided,
before installing them in the insert.
It is recommended to install side filters first and finish with center one(s).
NOTE: For PIK45 model, side filters are smaller than center ones.
A vertical arrow can be found on the filters border. Make sure to install the baffle filters with the
arrow pointing towards the inside of the hood insert. See figure beside.
1 Insert upper end of baffle filter into the insert.
2 Raise lower end of baffle filter to position inside of unit and push to insert the filter spring
inside the grease rail.
3 While pushing the baffle filter, slide it under the inner front retaining piece.
Make sure the baffle filters are positioned as shown beside in order to allow the grease to
reach the grease rail easily.
21. USE AND CARE
Baffle filters and impeller(s).
The baffle filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent solution. Baffle filters and impeller(s)
are dishwasher safe.
Remove baffle filters by pushing them towards the back of hood and rotating downward.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergent
or as a result of local water conditions—but this will not affect filter performance. This discoloration is not covered by the warranty.
Stainless steel cleaning: How to maintain its "BRIGHT LOOK".
Do:
• Regularly wash with clean cloth or rag soaked with warm water
and mild soap or liquid dish detergent.
• Always clean in the direction of original polish lines.
• Always rinse well with clear water (2 or 3 times) after cleaning.
Wipe dry completely.
• You may also use a specialized household stainless steel cleaner.
WARNING
!
CAUTION
- 12 -
HO0090
Do not:
• Use any steel or stainless steel wool or any other scrapers to
remove stubborn dirt.
• Use any harsh or abrasive cleansers.
• Allow dirt to accumulate.
• Let plaster dust or any other construction residues reach the
hood. During construction/renovation, cover the hood to make
sure no dust sticks to stainless steel surface.
1 2
HO0126
1
2
3
HD0334