Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Portable Ice Maker
USER INSTRUCTIONS
Control Panel
The green POWER light will blink when the unit is plugged in.
To turn the unit on, press the ON/OFF button. The green light will stay on and
the green light over the L will turn on indicating the unit is ON and the LARGE
size cube has been selected.
To change the size of the ice cube, press the SELECT button to change
between L (large) or S (small) ice cubes. The green light will indicate which
size has been selected.
The indicator light above the ADD WATER will turn red when there is
insufficient water for ice production. Please add water to the water reservoir
but do not overfill. Press the ON/OFF button twice to restart the ice making
process.
When the ice tray is full, the light above ICE FULL will turn red and the unit will
stop working. Please remove the ice tray, empty it, and replace the tray. Add
water if necessary. The unit will restart automatically.
Operating Instructions
1. Open the lid and remove the ice tray.
2. Add water to the water reservoir. DO NOT OVERFILL. The maximum amount
of water to add should not be more than 72 oz (9 cups). There is a MAX line
inside the water reservoir for reference.
3. Always use fresh potable water before starting ice cube production. To ensure
the cleanliness of the ice, please use fresh water at least once a day.
4. Plug in the ice maker. The POWER light will blink. Place the tray in the
reservoir and close lid.
5. Press ON/OFF button to turn unit on.
6. Select desired ice size. Default for the unit is the large size.
7. NOTE: Please select the small (S) cubes when the ambient temperature is
below 60°F. When the ambient temperature is above 86°F the large (L) size
ice cubes are recommended.
6
User Instructions
AFTER SALES SUPPORT
888-367-7373
Tabla de contenido
