Using Om-Gryphon Radio Cradle - Datalogic Om-Gryphon Serie Manual De Instalación Rápida

USING OM-GRYPHON RADIO CRADLE

The OM-GRYPHON cradle, paired with one Gryphon™ series reader, builds
a Cordless Reading System for the collection, decoding and transmission of
barcoded data.
It can be connected to a Host PC through an RS232, Wedge or Pen
emulation cable and is suited for a single-cradle layout.
Once it is powered, the yellow LED goes on. It will blink, only when the cradle
receives data from the gun. The red LED indicates the battery is charging.
Once the battery is charged, the green LED on the cradle goes on.
Reconditioning battery
button
Power on / Data
(yellow LED)
To setup your OM-GRYPHON cradle you must:
1. Make all system connections.
2. Configure the OM-GRYPHON cradle.
Charging
(red LED)
Charge completed
(green LED)
English
3