Finding Area And Volume; Error/Auto-Range Function - Calculated Industries Scale Master Classic 6020 Guia Del Usuario

Finding Area and Volume

Finding Area
1) Roll the first side and press
" " will appear in the scale box display and
m
the main display will be cleared.
2) Roll the second side and press
main display will be cleared.
3) Press
[RCL] [M2x]
value stored in this register. The second
press of
area, which is the value stored in
multiplied by the value stored in
Finding Volume
1) Roll the first side and press
2) Roll the second side and press
3) Set a Height value (see "Setting a Height").
4) Press
[RCL] [M2x]
value stored in this register. Press
second time to calculate and display the
area. Press the
volume. Press
display the stored height value.
a
ppendix

Error/Auto-Range Function

Error Message – Press
Auto Range Function – When rolling or calculating
large numbers, your answer will be displayed in
the next largest measurement unit (ex: 10,000 M
will display instead of 10,000,000 MM ).
12 – Scale Master
will calculate and display the
[M2x]
[M2x]
[M2x]
Classic
®
[M1+]
. This displays the linear
[M1+]
. This displays the linear
key again to find
a fourth time to
[RESET] to clear.
. A small
. The
[M2x]
[M1+]
.
[M2x]
.
.
[M2x]
a
[M2x]