Panasonic WJ-MS424 Manual Del Usuario página 17

SYSTEM 4
Sensor
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.
• Connect the VTR OUT connector of this unit to the input connector of the time lapse VTR.
• Connect the VIDEO OUT connector of this unit to the input connector of the monitor.
• Connect the wires of the alarm sensors to the alarm input pins of ALARM/REMOTE connector.
• Connect the ALARM OUTPUT pin of the ALARM/REMOTE connector of this unit to the alarm input terminal of the time
lapse VTR.
• Connect the recover output (alarm reset output) of the time lapse VTR to the ALARM RECOVER IN pin of the ALARM/
REMOTE connector of this unit.
• Connect the ALARM RESET OUT pin of the ALARM/REMOTE connector of this unit to the alarm reset in terminal of the
time lapse VTR.
Sensor
VIDEO
4 3 2 1
OUT IN OUT IN OUT IN OUT IN
Monitor
Sensor
Sensor
VTR VIDEO ALARM/REMOTE
OUT OUT
VTR
-15-
WJ-MS424
SIGNAL GND
Monitor