Description And Components; Proper And Improper Use - Boscarol PROFI Folleto Instructivo

1.

DESCRIPTION AND COMPONENTS

The "PROFI" vacuum mattress is a medical device that can be used to intervene to immobilize in case of body injuries or traumas or,
in most serious cases of spinal damage.
Externally, the vacuum mattress is made of welded and spread PVC, internally of polystyrene spheres; it is equipped with a useful
and easy-to-use valve.
FEATURES
2.
Denomination
Class of risk
Specifications
Maximum loading weight
Technical advantage
Operating temperature
Storage temperature
Tolerances
The features given are not binding for the manufacturer, they may therefore be modified without notice.
The device lifetime is 8 years when stored and used properly as indicated by the manufacturer:
the device shall be disposed after 8 years from the purchase

3. PROPER AND IMPROPER USE

The product is a professional one and it is intended for use in a medical or emergency situation, to allow the temporary immobilization
of any body part when the patology is compatible, and the eventual transfer to suitable apparatus for movement. In any case the
manufacturer does not assume any responsibility for improper uses of the product under the conditions listed below:
 Use by non-qualified staff;
 Non-observance of the immobilization techniques;
 Non-compliance by the operators of rules/specifications in force with regard to safety;
 Use of the device for non-compatible pathologies;
 Modifications or violations which have not been authorized by OSCAR BOSCAROL srl
 Non-respect of the provisions specified in this information leaflet
ATTENTION! Please note that:
The vacuum mattresses are suitable for use inside emergency vehicles with the patient on them

After 75 min. since patient'is immobilization, the vacuum level suitable for correct immobilisation must be

reset
The improper use of the device can cause injury or damage to the patient.

Patient always need to be properly fixed during transport

Rev. 11-2019
VACUUM MATTRESS
Vacuum mattress PROFI®
Medical device Class I
MDD 93/42/EEC -MDR 745/2017
Dimensions
L 2090 x B 950 x H 100 mm (±20)
Three internal independent chambre
8 - 24
>150 Kg
-10 ÷ 50 °C r.h. 10 ÷ 90 %
-10 ÷ 50 °C r.h. 10 ÷ 90 %
± 10% (all measurements)
Weight Handles
8 Kg 8