Tabla de contenido
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-
907-8669).
STEP 3:
Attach the Support Frame (No. 28)
to the Slide Rail (No. 22) with Hex
Bolt (No. 25), 2 Flat Washers (No.
17), and Nylon Nut (No. 16) using
Wrench (No. 75) and Spanner (No.
76). Fix with Small Knob (No. 27)
and Flat Washer (No. 17) and
tighten.
STEP 4:
Connect the Connection Wire (No.
46) to Sensor Wire (No. 36), then
tighten the Slide Rail (No. 22) and
Foot Plates (No. 15L/R) to the Main
Frame (No. 1) with 2 Hex Bolts (No.
14), 4 Flat Washers (No. 8), Large
Knob (No. 2), Flat Washer (No. 35)
and 2 Nylon Nuts (No. 9) using
Wrench (No. 74). Finally cover with
4 Caps (No. 40).
Insert 2 Hex Bolts (No. 12) to the
short shaft of the Main Frame (No. 1)
and tighten with Wrench (No. 74).
Attach 2 Hex Bolts (No. 12) through
the Pedals (No. 11) and 2 Flat
Washers (No. 10) to the Main
Frame (No. 1). Tighten with Wrench
(No. 74).
NOTE: The Pedals (No. 11) should
rest on the bottom Hex Bolts (No. 12)
for short shaft of the Main Frame
(No. 1).
10
Tabla de contenido
