Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Model
BTLDTW
Units
N-m
Kgf.m
(Selectable)
Measurement
8-85
1-8
Range
± 2%（clockwise / counter-clockwise of
Accuracy
reading, (10% to 100% of full scale)（
0.1
Resolution
N-m 0.1 Kgf.m
Jaw Opening
3/16¨ – 1-3/8¨ (5 - 35 mm)
Operating
3V (2 x AAA batteries, supplied)
Voltage
Operating
32ºF~104ºF
Temperature
(0ºC ~ 40ºC)
Storage
-4ºF ~113ºF（
Temperature
(-20ºC ~ 45ºC)
Humidity
Up to 60% non-condensing
Wrench (+
2.79 lbs (1.27 kg)
Case) Weight
Wrench
15.25¨ (0.387 m)
Length
Memory# Factory Presets
Nut Size
Lbf.ft
14
¨
5/8
, 11/16
Lbf.in
168
1
N-m
18
17mm
Kgf.m
1.8
Lbf.ft
30
13/16¨
Lbf.in
360
2
N-m
42
22mm
Kgf.m
4.2
Lbf.ft
40
15/16¨
Lbf.in
480
3
N-m
54
24mm
Kgf.m
5.5
Lbf.ft
48
1-1/16¨
Lbf.in
576
4
N-m
55
26mm
Kgf.m
5.6
Lbf.ft
59
1-5/16¨
Lbf.in
708
5
N-m
65
27mm, 29mm
Kgf.m
6.6
Positions 6-10 available for custom torque values
CONTROLS AND FEATURES
A
Lbf.ft
Lbf.in
6-63
71-752
M
D
E
0.1
1.0
Lbf.ft
Lbf.in
DISPLAY
A. Preset torque value
B. Real time torque value
C. Available torque units
D. Factory presets 1-5
User-defined 6-10
E. Battery indicator
F. Peak vs. Track mode
G. Minus (counter rotation
Tube Size
K
¨
1/4¨, 5/16¨
KEYPAD
1/4¨
H. ON/OFF
I. Memory/Mode
J. Scroll
K. Reset- zero out torque values
3/8¨
L. Next entry and display light
SET UP/QUICK START
3/8¨
BATTERY INSTALLATION
1.
Unscrew black battery cap counter-clockwise.
2.
Insert 2 AAA batteries included.(Insert positive
1/2¨
side (+) inward).
3.
Re-install battery cover.
1/2¨
POWER ON/OFF
1.
Press [ ] to turn wrench ON. Start-up display
will appear.
5/8¨
2.
Press [ ] again to turn OFF.
DISPLAY LIGHT
1/2¨
1. Press [
2.
Press [
SELECT TORQUE UNITS
3/4¨
1.
To select 1 of 4 units; lbf.ft, lbf.in, kgf.m, or N-m
press [M] until unit appears at RIGHT of display.
2.
Press [+] until desired unit is found.
5/8¨
3.
To select torque value shown, wait 3 seconds
or more, or press [M] which will enter last unit
shown and move to auto-off feature.
4.
You are now ready to work.
B
P T
F
G
H
I
J
] to turn ON.
] again to turn OFF.
SET UP
AUTO-OFF POWER
C
1.
To conserve battery power, display (and display
light, if turned on) is factory set to turn off after
5 minutes of inactivity. Display can be set to
N.m
turn off after 15 minutes of inactivity or to run
lbf.in
continuously.
lbf.ft
2.
To select auto-off after 5 or 15 minutes
kgf.m
or to remove factory auto-off feature, (run
continuously), press the power key if display is
not already on.
3.
Press and release [M] until 5, 15 or OFF appears
in the display.
4.
To select 5 [minutes], 15 [minutes] or OFF, press
+
[
] until desired value appears in the display.
5.
Wait 3 seconds (or longer), or press [M] before 3
seconds to enter last value shown.
SELECT TRACK OR PEAK MODE
1. Default mode is "T" (Track), which shows "real
time" torque values in the B display. Once torque
removed, display returns to 0.
2. To select PEAK MODE (P), press [M] then [
to change from "T" to "P". In PEAK MODE, the
maximum torque value reached will be shown on
the B display for 2 seconds. After 2 seconds, this
value will continuously flash in the B display (as a
reminder of the maximum value thus far).
3. To eliminate PEAK (P) value shown, press [
L
SELECT A FACTORY TARGET TORQUE
SETTING
1.
Wrench is factory programmed with five presets
(memory #'s 1-5) for all 4 units: Lbf.ft, Lbf.in,
N-m, Kgf.m. (see page 5)
2.
Press
to turn wrench ON.
+
3.
Press [
] to select a memory storage number
(M1, M2, M3, M4 or M5).
ENTER CUSTOM TORQUE VALUES
1.
To enter your own custom torque value (using
Memory #'s M6-M0), press 0 to turn wrench ON.
+
2.
Press [
] to select a memory storage number.
+
3.
Press and hold [
] until
display. Current torque value will appear and the
first digit will flash.
+
4.
Press [
] to scroll to desired number.
5.
Press [
] to go to next digit. Use [
to desired number. Repeat this process until
required digits have been accessed.
6.
Once desired torque value is entered, press [M].
NOTE: Erro will show in the display if torque value you entered is
less than minimum torque of 10% full scale or greater than maximum
torque value, as shown in above specifications table (Measurement
Range) for actual torque value you have selected.
+
]
].
shows on the
+
] to scroll
2
Tabla de contenido
