To Turn Off - Coleman 5155B Instrucciones De Uso

To Light
continued
NOTE: If lantern does not light,
repeat above step. If the lantern
does not light after several attempts,
check for a spark while clicking the
valve. If no spark is present, check
the electrode gap. The gap should
be about 1/8" (3 mm). Bend flat
electrode to set gap. If the lantern is
wet due to rain, high humidity, etc.,
the valve may not spark. Use light-
ing procedure for match light version
lanterns.
■ Brightness may be adjusted with
fuel valve.

To Turn Off

■ Turn fuel valve off.
8
1/8"
(3 mm)
To Store
■ Make sure lantern is cool.
■ Move lantern away from flame (including pilot lights) and other
ignition sources.
■ Remove propane cylinder from lantern.
■ Replace protective cap on propane cylinder.
■ Lantern can be placed in base for secure storage.
DANGER
• EXPLOSION - FIRE HAZARD
•
Never store propane near high heat, open flames, pilot lights, direct sunlight,
other ignition sources or where temperatures exceed 120 degrees F (49°C).
•
The cylinder must be disconnected when the lantern is in storage.