EN
24
OPERATING INSTRUCTIONS
• This fireplace is fueled by alcohol which is low-flash-point and volatile, you should
let the expert installation person to have a check for the environment, then give a
considerable install solution.
• Install basing on this instruction.
• Within 50-60cm around the fireplace should be anti-inflammatory or anti-
hyperthermia material.
• Make sure the on-table fireplace/freestanding fireplace located on a flat table /
floor and it will not be touched when walking around. Please protect the kids to
touch it.
• Pay attention that the burner should lay against strong-wind for any dangerous.
• Alcohol used in the fireplace should be stored in a shady and safety place.
• Use 95% biomass energy alcohol, or the alcohol from fireplace companies.
• 95% biomass energy alcohol ethanol refined from plants.
Note: Some cheap alcohol can fired but have some harmful additives like methanal
in it work against to our health.
• Be aware of the children, make them away from the alcohol fireplace.
• Do not put this product on the entrance or exit.
Ignition
• Pour alcohols into the burner, leave 1-2 cm under the burner-opening.
• If alcohols spilled, please clear and dry it before igniting.
• Do not add alcohols when it's burning. Fuels only can be added without naked fire.
Wait 10-20 minutes to let it calm down before put in fuel.
• Dip some alcohol by the provided stick then fire the stick and put it into the burner.
• Maybe there are some slight bombs voice in first time, keep people 20-30 cm
away from the fireplace when igniting.
Quenching fire
• Fire will extinguish when alcohol burned out (about 1.5 hours).
• If you want to quench the fire during the burning, please use the provided stick to
close the burner.