nania Newline F11 Instrucciones De Uso página 11

Alzador de grupo 2-3
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Your Group 2-3 booster seat
(2)
1. Height adjustable head support
2. Diagonal belt guide (x2)
3. Back
4. Seat
GB
5. Instruction manual pouch (depending on the model)
In-car installation
Gr. 2-3, from 15 to 36 kg (from approximately 3 to 12 years)
Your car seat is fitted with an adjustable headrest that has been designed to sup-
port your child throughout growth by providing maximum lateral protection.
Raise the adjustable headrest to its highest position (3). Place the car seat against
the back seat of the vehicle
(4)
and feed the diagonal strap of the belt through the
headrest guide
(5)
(6). Sit your child in the car seat. The folding armrests make it
easier to install and access the car seat. Make sure that the child's back is fully in
contact with the back of the car seat. Pull and fasten the vehicle seat belt. Pass
the diagonal strap of the belt under the arm rest opposite the belt guide used. The
waist strap of the belt passes under both armrests (7). Lower the adjustable head-
rest and adjust it to the height of your child (8). It should be positioned so that it
surrounds your child's head, providing maximum lateral protection, whilst guiding
the diagonal belt over the child's shoulder so that it doesn't extend onto the child's
neck
(9)
(10). Tighten the vehicle seat belt (11).
Make sure that the seat belt is properly tightened, that it is not twisted and that it
is not positioned at the level of your child's neck.
To remove your child from the car seat, simply unbuckle the seat belt and place it
at the side of the car seat. The belt will remain suspended from the headrest belt
guide (12).
CAUTION: Before each journey, check that the armrests are lowered. Secure your
car seat with the vehicle seat belt at all times, even when your child is not in the car
seat. An unsecured car seat can cause injuries in the event of a collision.
Diagonal belt comfort pad
(optional according to model)
Your car seat may come with a comfort pad which can be placed on the diagonal
car seat belt when the seat is used for groups 2 and 3. The comfort pad prevents
your child's neck from being in direct contact with the car seat belt.
Open the comfort pad (13). Place it around the diagonal car seat belt and close it
using the velcro bands (14). Position the comfort pad so that it is level with your
child's shoulder (15).
11
User guide - GB
FC8301B.indd 11
10/02/2011 14:37:02
Tabla de contenido
loading

Este manual también es adecuado para:

Beline f11Newline f10Beline f10

Tabla de contenido