WEG LSP Serie Manual Del Usuario página 11

General Information
For the model LSP300, classified as Multiple Beam Device, not is defined a resolution and
detection zone, is defined only number of beams and indicate what position each one is set.
The LSP can be manufactured to provide different solutions according applications requires,
with models that's have beam spacing center-to-center of 10, 20 or 300 mm.
10 mm 20 mm 300 mm
Finger detection Hand or arm detection Legs or body detection
Figure 2.2: Typical applications for LSP
To gage its resolution a test piece is supplied with the product tailored to the resolution of the
light curtain.
Figure 2.3: Test piece of LSP
For verification, the test piece should be introduced into the detection area of the light curtain
and moved through all protective height, during this procedure the light curtain should remain
in OFF STATE.
10 | LSP