Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FUSE REPLACEMENT
IF
LIGHTS
FAIL
DISCONNECT THE POWER AT THE
SERVICE ENTRANCE. CHECK THE FUSE
AND REPLACE IF NECESSARY.
1. Remove the grease filters.
2. Remove the cover of the fuse box.
3. Locate the fuse holder. Unscrew its cap
and remove the fuse.
4. Replace the fuse with the same size and
amperage (5x20mm, 4amp, 125volt).
Do not use fuses greater than 4 amps.
Fuses greater than 4 amps may
damage the transformer.
5. Reinstall the fuse holder cap, fuse box
cover and grease filters.
6. Reconnect power at the service entrance.
TO
OPERATE,
- 5 -
FUSE BOX
FUSE
FIG. 3
Tabla de contenido
