Punktal PK-810PL Manual De Producto página 13

When the indicator light turns off, remove the plug.
Ÿ
Hold the Iron horizontally over the sink and Press the self-clean Button for about
Ÿ
1-2 minutes; Pitch the iron up and down slowly while self-cleaning. Check that all
water and steam thoroughly stop coming out of the sole plate vents. After self-
clean is finished empty any remaining water. Release button to stop Auto-clean
function. Repeat the procedure if necessary.
NOTE! Do not use any descaling uid or vinegar.
Turn the steam control to the MAX position and Plug in the iron and heat for
Ÿ
about 2 minutes to dry out any remaining water.
Iron on a towel to remove any drops of water remaining on the bottom of iron.
Ÿ
Cool as usual and store the iron.
Ÿ
Clean & maintenance:
Turn the temperature Control Dial to the MIN position and unplug the iron and
Ÿ
allow to cool the heating plate when carry out the maintenance.
Empty the Iron immediately after using. Set the variable steam control to max.
Ÿ
And empty any water left in tank. Then set the variable steam control to off
position. Do not store the iron with water in it.
When necessary use a damp cloth to clean the cool iron, then wipe dry.
Ÿ
Starch and other residue may be easily removed from the Soleplate with a
Ÿ
damp cloth.
To avoid scratching the finishing, never use a metallic pad to clean the Soleplate,
Ÿ
and never place the iron on a rough surface.
Warning: To protect against electric shock, do not immerse cord, plug, or
Ÿ
appliance in water or any other liquid.
Always store the iron on its heel to protect the soleplate.
Ÿ
NOTE: THE SOLEPLATE OF STEAM IRON MUST TO BE
DRIED AFTER USE
13