Steam Ironing; Self Clean - Punktal PK-810PL Manual De Producto

Plancha a vapor
Ocultar thumbs Ver también para PK-810PL:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Steam ironing:

The steam feature provides steam for removing normal wrinkles.
Ÿ
Fill the iron with water as described in "How to fill with water". Turn the steam
Ÿ
control to
Off Position.
Position the iron on its rear heel then Plug iron into electrical outlet.
Ÿ
Turn the temperature control knob to the position according to the fabric being
Ÿ
ironed as described in point 3 of 'Setting the temperature'
The indicator light will turn OFF when the indicated setting reaches the correct
Ÿ
temperature.
Turn the steam control to the
Ÿ
start.
Bursting steam ironing:
The Bursting steam feature provides powerful steam for removing stubborn
Ÿ
wrinkles
Fill the iron with water as described in "How to fill with water". Turn the steam
Ÿ
control to Off Position.
Position the iron on its rear heel then Plug iron into electrical outlet.
Ÿ
As indicated on the temperature control knob, Bursting steam ironing is only
Ÿ
possible at higher temperature setting indicated with 'MAX' mark, otherwise the
water will leak from the soleplate.
Turn the temperature control knob to the position according to the fabric being
Ÿ
ironed as described in point 3 of 'Setting the temperature'
The indicator light will turn 'OFF' when the indicated setting reaches the correct
Ÿ
temperature.
Press the Steam bursting button to release the bursting steam. Pressing the
Ÿ
button several times may be necessary to prime the surge system.
Wait a few seconds for the steam to penetrate the fabric before pressing the
Ÿ
button again for more steam.
NOTE: For optimum steam quality, do not apply more than three successive
Ÿ
'SHOT' after the indicator light goes off..

Self clean:

IMPORTANT: Your iron will give the best ironing results and last longest if you apply
the Self Cleaning once a month.
Fill the water tank to half with water and set the steam button at closed position.
Ÿ
Position the iron on its rear heel. Set the temperature at "MAX" and plug in.
Ÿ
ON position, steam will be sprayed, ironing can
12
Tabla de contenido
loading

Tabla de contenido