Maxon M-14-30 Manual De Instrucciones página 9

NOTE: Holes for mounting brackets are marked and drilled only after liftgate is in correct
position on the pickup bed.
1. Position the LH and RH mounting brackets
(Kit items) in the pickup bed just forward
of corner posts (FIG. 9-1).
2. Position liftgate in the rear opening of the
pickup bed (FIG. 9-1).
• Liftgate centered on rear opening in
pickup bed
• Columns vertical
• Spare tire access hole aligned with
spare tire tube on truck
• Top of main frame fl ush with fl oor of
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
3. Bolt the main frame brackets on liftgate,
to the RH mounting brackets as shown
in FIG. 9-1. Handtighten bolts and nuts.
Repeat for LH mounting bracket.
4. Let liftgate hang, in the rear opening of
pickup bed, with support from corner
posts.
LIFT CORPORATION Sht. 9 of 38 DSG#
INSTALLING LIFTGATE
RH MOUNTING
BRACKET
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
FIG. 9-1
M-14-30
Rev. C Date: 12/12/17
CORNER
POST
3/8"-16 X 1" LG BOLT
3/8" LOCK WASHER
3/8"-16 NUT
(3 PLACES)
LIFTGATE
MAIN FRAME
RH BRACKET