KTM Power Parts 77112945044 Manual Del Usuario página 14

A
C
C
D
A
14
3
4
-
-
2
-
B A 2x HH collar screws M6x90 (10Nm)
B 2x HH collar screws M6x50 (10Nm) (included)
1 C 2x HH collar screws M6x35 (10Nm)
D 1x HH collar screw M6x30 (10Nm)
B
E 1x HH collar screw M6x25 (10Nm) (included)
E
- Mount the starter with the HH collar screws M6x20 (3) (included) (10Nm).
Route the E-start wiring harness (included)
- Remove the control unit (4).
- Disconnect the two plug-in connections (5).
5
Mount the new gasket (1) (included) for the torque limiter cover.
Mount the torque limiter cover (2) (included).
Mount and tighten the screws of the ignition cover and torque limiter cover.