3. Use the flathead screw driver to pry the spark arrester out
from the muffler
4. Remove the carbon deposits on the muffler screen and spark
arrester using a wire brush.
5. Install the muffler screen.
6. Install the cover
6. TROUBLE SHOOTING
1) ENGINE WON'T START
1. Fuel systems
No fuel supplied to combustion chamber.
• No fuel in tank....Supply fuel.
• Fuel in tank....Fuel tank cap air vent knob to "ON", fuel cock knob to "ON".
• Clogged fuel line....Clean fuel line.
• clogged carburetor....Clean carburetor.
2. Engine oil system
Insuficiente.
• Oil level is low....Add engine oil.
3. Electrical systems
Poor spark
• Spark plug dirty with carbon or wet....Remove carbon or wipe spark plug dry.
• Faulty ignition system....Consult dealer.
4. Compression insufficient
• Worn out piston and cylinder....Consult dealer.
2) GENERATOR WON'T PRODUCE POWER
Safety device (AC) to "OFF" ...Stop the engine, then restart.
Safety device (DC) to "OFF" ...Press to reset the DC protector
All manuals and user guides at all-guides.com
13
ENGLISH