NOTE: If anything gets damaged, both the plug and the cable must be repaired by a
qualified repairman or electrician.
CLEANING AND MAINTENANCE
To change the dust bag
NOTE:
1) Always operate the cleaner with dust bag installed.
2) If you forget to attach a dust bag or install it incorrectly, the front cover may not close
completely.
Follow these steps (see fig.10):
Open the front cover by pushing the lock block upward.
Remove the dust bag from the bag support.
Replace paper bag when it is full of dirt.
Place a new paper bag into the unit.
Close the cover by pushing down until it is locked.
To clean filter
NOTE:
1) Filter should be cleaned at least twice a year or when it becomes visible soiled.
2) Always operate the cleaner with filter installed.
3) Otherwise, reduced suction or motor damage may be caused.
4) Disconnect from electrical outlet, before cleaning filter.
Fig.10
8