Performance Chevrolet Camaro SG3 Instrucciones De Instalación página 13

Do not apply final torque at this time. Final torque should be applied during wheel alignment procedure.
Final Torque
First Pass: 115 N·m (85 lb ft)
Final Pass: plus 90-105 degrees
2. Position the SG3 Rear Shock Absorber Assembly (1) in the vehicle.
Caution: Refer to Fastener Caution.
3. Install the [3x] upper shock absorber nuts (1) and tighten to 43 N·m (32 lb ft).
Chevrolet Camaro SG3 Sport Suspension
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84188729
REV 01JN16
PART NO.
DATE
10AU15 Initial Release - Thomas Gierman
01JN16 Revision - Andrew Rogers
13
SHEET
REVISION
48
OF
AUTH
2117284
2484395