KTM Power Parts 75005007200 Manual Del Usuario página 13

Fix the flasher bracket in the upper licence plate holder holes (below the
licence plate).
Grind the supplied upper part of the licence plate holder flat along the
scored lines.
Place the exhaust holder on the upper part of the licence plate holder as
shown in the picture.
Guide the licence plate lamp and flasher cable through the opening of
the upper part of the licence plate holder and the exhaust bracket. Fix
the upper part of the licence plate holder to the rear.
Guide the flasher cable through the holes and connect it, brown/pink on
the left and brown /black on the right, and fix it with cable clamps. Screw
the licence plate holder to the upper part of the licence plate holder, plug
in the connector and screw it to the rear. De-grease the plastic around the
original flasher bracket and cover it with the stickers supplied.
13