Troubleshooting; Specifications; Cable Sizes - Ironside 4000 D Manual De Utilización Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25

9. Troubleshooting

Problems
Load connected to the generating set during start-up.
Air filter (fig. A – No.12) blocked.
Fuel level too low
Engine does not
Fuel filter (fig. A – No.11) blocked.
start
Oil level too low.
Fuel supply blocked or leaking
Fuel level too low
Engine stopped
Oil level too low.
Circuit breakers (fig. A – No. 6) not actuated.
Defective appliance supply lead
No
electric current
Defective electrical sockets (fig. A – No.7).
Defective alternator.
Device connected or faulty lead.
Triggering the
circuit breakers
Overload (see § Capacity of the generating set).

10. Specifications

Model
Maximum output / Rated output
Acoustic pressure at 1 m
Engine type
Recommended fuel
Fuel tank capacity
Recommended oil
Oil sump capacity
Oil failure cut-out
Circuit breaker
Direct current
Alternating current
Socket type
Spark plug type
Battery
Dimensions l x w x h
Weight (without fuel)
● : standard
○ : option

11. Cable sizes

Laying mode = cables on cable tray or racks not perforated / admissible voltage drop = 5% / Multiconductors.
Cable type PVC 70°C (example H07RNF) / Ambient temperature =30°C.
Rated Current (A)
Single-phase
10
16
20
25
32
40
50
63
Probable causes
X: not possible
0 to 50m
mm² / AWG
Three-phase
4 / 10
1.5 / 14
6 / 9
2.5 / 12
10 / 7
2.5 / 12
10 / 7
4 / 10
10 / 7
16 / 5
16 / 5
25 / 3
Disconnect the load.
Clean the air filter (see § Cleaning the air filter).
Fill up with fuel (see § Filling up with fuel).
Replace the fuel filter (see § Replacement of the fuel
filter).
Check
the
(see. § Checking of oil level).
Have it checked, repaired or replaced.*
Fill up with fuel (see § Filling up with fuel).
Check
the
(see. § Checking of oil level).
Activate the circuit breakers.
Change the lead.
Have it checked, repaired or replaced.*
Have it checked, repaired or replaced.*
Disconnect the device and the lead.
Remove the overload.
* Operation(s) to be entrusted to one of our agents.
Cable lengths
51 to 100m
mm² / AWG
Single-phase
Three-phase
10 / 7
2.5 / 12
10 / 7
4 / 10
16 / 5
4 / 10
16 / 5
6 / 9
25 / 3
35 / 2
35 / 2
50 / 0
Possible solutions
oil
level
and
fill-up
oil
level
and
fill
up
GENERATOR 4000 D
3400 W / 2720 W
95 dB(A)
Kohler KD350
Diesel oil
4.3 L
SAE 5W40
1.2 L
X
X
230V-11.9A
2 x 2P+T 230V 10/16A
X
X
81 x 55.5 x 59 cm
70 kg
101 to 150m
mm² / AWG
Single-phase
10 / 7
16 / 5
25 / 3
25 / 3
35 / 2
50 / 0
50 / 0
70 / 2 / 0
if
necessary
if
necessary
Three-phase
4 / 10
6 / 9
6 / 9
10 / 7
Tabla de contenido
loading

Tabla de contenido