Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CHAP. 8. OPTIONAL
TOMATO MASHER OPTIONAL
The tomato masher is an optional accessory for the set machines 12 and 22. It is able to squeeze tomatoes, fruit (without
stone) and vegetable (cooked).
The food product load in the hopper happens manually; always manually and with the pestle help the food product is
introduced in the grinding neck towards the Archimedean screw.
The tomato masher application assembly on the machine is made in the following phases (in exemplification way it is
reported the machine with the basic body)
1.
assemble the pipe union 2 and
tighten it with the proper
accessories block knob 1
2.
Insert the Archimedean screw
3 inside the pipe union 2
3.
Insert the filter 4
4.
Block the filter with the wheel
5
5.
Insert and position the drain 6
6.
Arrange the salvage dump
containers for the puree and
for the reject
7.
For the functioning refer to the
mincer instruction
MOZZARELLA CHEESE CUTTER OPTIONAL
The mozzarella cheese cutter is an optional accessory for the set machine 12 and 22. It is able to cut cheese, mozzarella,
mushrooms and carrots using the respective accessories:
cone n. 1 for mozzarella
cone n. 2 for vegetables in general
holes mm 7
The food product load in the hopper happens manually; always manually and with the pestle help the food product is
introduced in the grinding neck towards the Archimedean screw.
The mozzarella cheese cutter application assembly on the machine is made in the following phases (in exemplification way
it is reported the machine with the basic body)
1.
Assemble the apposite
cones case accessory 2
and tighten it with the
block accessories knob
1
2.
Insert the proper hopper
5 supplied with the
mozzarella cheese
cutter
3.
Insert the desired cone 3
tighten it with the die 4
through the key 6
supplied in equipment
4.
Arrange the salvage
dump container
5.
For the functioning
refer to the mincer
instructions.
03-2008-TRITACARNE-GRAT-STAMPA.doc
cone n. 3 to grate
holes mm 4
holes mm 2,5
cone n .4 to slice
cutting thickness mm 2
Pag.
di
17
17
Capítulos
Tabla de contenido
