Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Please call 1-800-858-8501 for assistance before returning product to store.
If you experience a problem, follow this guide. You may also want to visit our Web site at:
www.desatech.com. If the problem persists, call* for assistance at 1-800-858-8501, 7:30
AM to 4:30 PM CST (M-F). You may also write* to:
DESA Specialty Products™
P.O. Box 90004
Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model
Number, Date of Purchase, and Place of Purchase.
TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
Light will not
1. Light switch is turned off.
come on.
2. Bulb is loose or burned out.
3. Fuse is blown or circuit
4. Daylight turn-off is in effect
5. Incorrect circuit wiring, if
6. Re-aim the sensor to cover
Light comes
1. Light Control may be in-
on in day-
light.
2. Light Control is in Test. (Set
Light comes
1. LightControlmaybesensing
on for no
apparent
reason.
2. Sensitivity is set too high.
TECHNICAL SERVICE
No Service Parts Available for this Product
breaker is turned off.
(recheck after dark).
this is a new installation.
desired area.
stalled in a relatively dark
location.
control switch to an ON-
TIME position.)
small animals or automobile
traffic (re-aim sensor).
(Reduce sensitivity.)
SYMPTOM
POSSIBLE CAUSE
Light stays
1. The sensor is pointed at
on continu-
ously.
2. The sensor is pointed
3. Light control is in Manual
4. LightcontrolisinDual Br it e
Light flashes
1. Heat being reflected from
on and off.
6
nearby objects that cause
heat to trigger the sensor.
(Aim the sensor away from
nearby objects.)
toward a heat source like
an air vent, dryer vent,
or brightly-painted heat-
reflective surface. (Re-aim
sensor.)
Mode. (Switch to Auto.)
mode.
other objects may be
affecting the sensor. (Re-
aim sensor.)
595-5578-08
®
Tabla de contenido
