Setting The Ring Tone - Niko 10-556 Manual Del Usuario

10-556/10-560/10-586
Standard operation of the function keys:
Press:
to open the door
to switch on the light on the external unit
to retrieve the camera image from one or more external units
to deactivate the ring signal (red LED lights) and to end the call (only unit without receiver)
/ to control another system component. Check with your installer.
to control another system component (unly unit with receiver). Check with your installer.
(only on unit without receiver) to make a call:
- press briefly to accept the call
- keep the key pressed to speak, let go of the key to listen
It is possible that your installer has assigned other functions to one or more function keys. If the function
keys have been modified by your installer, they may have the following function:
- If you are having a conversation: opening the door.
- If you are not yet having a conversation: switching on the light at the external unit.
- Opening the door 30 seconds after reception of a call from that door.
- Calling another internal unit.
- Switching a relay.
- Calling another internal unit.
- Activating the 'ring-and-come-in' function, so the door automatically opens if someone rings at
the external unit (the green LED lights).
- Activating the reroute function, so another internal unit receives the call signal if someone rings
at the front door (the green LED lights).
- Calling another internal unit.
- Controlling another system component.

Setting the ring tone

You can set a different ring tone for each type of call via the function key buttons. You can choose
from 13 ring tones.
for 8s until you hear a beep and both LEDs light.
1. Press
2. Repeatedly press one of the following function key buttons to go through the different ring tones.
- Press
the installer).
- Press
- Press
- Press
3. Wait 8s until you hear a beep and the LEDs go out. The last selected ring tones are stored in
memory.
User manual - Video internal unit
to select the ring tone for the main external unit (with address equal to 0, check with
to select the ring tone for the other external units (with address different from 0).
to select the ring tone for the floor bell push button.
to select the ring tone for an internal call.
EN
21