Scott SNOWMOBILE Manual Del Usuario página 5

CHANGING THE LENS
1. Remove the defective lens from the frame by pulling the nose section
away from the lens and removing the lens from each of the mounts.
2. When inserting the new lens, begin at the nose section of the goggles.
Press the nose section together and insert the lens into the groove so
that the mounts engage.
3. Now continue with the lower edge of the lens and insert it fully into the
bile
frame. Ensure that the notches engage with the mounts properly.
on-
4. Repeat the process on the upper edge of the goggles, moving towards
the middle.
gles
5. If all the notches have now engaged with the frame, insert the last one in
rac-
the centre of the frame.
blic.
6. Check that the lens is located securely in the groove all the way round. If
cor-
this is not the case, apply slight pressure to click it into place.
the
7. Please note that ideally the lens should be changed at room temperature
so that the frame is sufficiently pliable.
fol-
Should you need a new lens, please make a note of the model name, which
is marked inside the frame (see position «5» behind the lens) and order the
relevant replacement lens from your specialist retailer.
box
ens
og-
vels
ded!
l to
be
cks
t be
our
SAFETY AND RANGE OF APPLICATION
All our lenses correspond to optic class 1 (suitable for continuous use) in
accordance with EN 166 (version 04-2002). Every lens provides 100% pro-
g up.
tection against UVA/UVB rays up to 380 nm (our patented amplifier lenses
rec-
even provide protection up to 400 nm).
Only original SCOTT lenses meet these requirements. The lenses do not pro-
sing
vide protection against hard or pointed objects. The purpose of the snow-
mobile goggles is to protect you from snow, wind, cold and harmful rays
ater
of the sun. Moreover, these goggles are not suitable for protection against
but
artificial light. Do not look directly at the sun through them. These are not
oth.
safety goggles. Depending on the type, our lenses have different light reduc-
use
tion or transmission values. This product it not a toy; it is a piece of sports
equipment and was developed and intended for sports purposes. SCOTT
that
Sports SA will not accept liability for any damage caused by improper use
ng.
of the goggles.
PT_16_MANUAL_SMB Goggle_82x148_V3.indd 5
5- ENGLISH
16.11.15 11: