Ezviz T6 Guía Inicio Rápida página 9

- Slide the T6 to the base and secure it with the base.
3
Recording Closed Status
Keep the door or window closed and then press and hold the button on T6 for
2s to record the closed status. The indicator flickers red for 15s indicating
the status is recorded.
The closed status requires recording again after the T6 being taken off
to recharge or adjust the installation position.
If you want to install the T6 to
supplied foam
4
Completing Installation
The indicator blinks red when the door or window gets opened and send the
alarm message to the linked EZVIZ account.
The indicator blinks blue when the door or window gets closed.
Maintenance
When the battery runs out, a low battery warning will be sent to the EZVIZ account
to remind you to recharge. Slide the T6 to take it off from the base to recharge and
install it back after recharged.
other doors or
sticker.
4
windows, use either of the