Operating Instructions - Kobalt KMC 124B-03 Manual Del Usuario

OPERATING INSTRUCTIONS

1. To Attach Battery Pack
a. Ensure that the paddle switch (K) is in the OFF
position.
b. Align the raised portion on the battery pack
with the grooves on the bottom of the tool,
then slide the battery pack onto the tool, as
shown.
c. Make sure that the latches on the battery
pack snap into place and the battery pack is
secured to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Ensure that the paddle switch (K) is in the OFF position.
b. Press the battery-release buttons to release the battery pack.
c. Pull forward on the battery pack to remove it from the tool.
WARNING
• To reduce the risk of injury, always remove the battery pack before making any adjustments
or changing accessories.
2. Paddle Switch Operation
The saw is equipped with a paddle switch (K) to
turn the tool on and off.
a. To turn the tool ON, push the lock-off lever (J)
forward, then squeeze the paddle switch.
b. To turn it OFF, release the paddle switch and
allow it to return to the OFF position. Make
sure that the tool comes to a complete stop
before laying the tool down.
NOTICE: If the battery is inserted when the tool
switch is in the "ON" position, the tool will not run.
Turn the tool off, then turn it on to begin work.
WARNING
• To reduce the risk of injury, hold the handle and auxiliary handle firmly with both hands to
provide a secure support during operation.
• To reduce the risk of injury, wear safety goggles or glasses with side shields during power
tool operation.
1
2
K
11
battery-release button
J