Regular Checks; Consumables; Warranty; Troubleshooting - Dustcontrol DC Tromb 400c Traducción Del Manual De Instrucciones De Servicio Original

Overheating
If the machine is at risk of overheating (for example, as a result of powerful throttling), the temperature guard will trip and the
machine will stop. The operator must then press the power switch to the OFF position, unplug from the mains and wait 3-5
minutes for the machine to cool down. Then reset the temperature guard by pressing the RESET button. Reconnect the power
cord to the electrical outlet and restart the machine by pressing the power switch to the ON position.

Regular checks

Regularly check the power cord for damage.
The machine must be tested and inspected at least once a year due to its use with hazardous materials. Worn parts must be
replaced. Never risk functionality and service life. Only use genuine parts.

Consumables

Description
Coupling socket
Coupling socket
Hose Ø=50
HEPA filter
Fine filter, polyester with integrated filter guard
Fine filter, cellulose with integrated filter guard
Plastic bag, 50 pcs
Intellibag, 10 pcs/roll
Plastic bag Longopac
For spare parts, see the Dustcontrol

Warranty

The warranty period is two years and covers manufacturing defects. The warranty is valid on condition that the machine is used in
the normal way and receives the required service. Normal wear and tear is not covered. Repairs must be carried out by
Dustcontrol or personnnel authorized by Dustcontrol. Otherwise, the warranty is void.

Troubleshooting

Problem
Motor not running.
Motor stops immediately after starting.
Motor runs, but no suction.
Part No.
2008
2129
2013
44016
44017
44043
4314
43619
432177
website.
Cause
Power supply not connected.
Incorrect fuse.
Suction hose not connected.
DC Tromb, Art.nr. 9480-I
Action
Connect power supply.
Replace with correct fuse.
Connect hose.
19