Isotronic 62160 Instrucciones De Uso página 6

Dear Client,
Congratulations for choosing one of our quality products. Please follow these instructions carefully and keep them with you.
Product description
The novel flying insect exhauster attracts with its 6 special UV-LEDs the flying insects and intakes them then directly via a
ventilator into the integrated trapping net (can be removed and be emptied by easy turning). There, the insects dehydrate and
die. The device can be placed in standing, lying or hanging position and works extremely quiet.
Scope of delivery
• Flying insect exhauster
• Mains supply adaptor
Connection to the mains supply
The device is designed for an operating voltage of 230 Volt~. Make sure before plugging the mains plug of the device into the
socket outlet of your house installation that the operating voltage of your house installation meets this voltage (e.g. on
journeys)
Putting into operation
1. The ultraviolet light attracts the flying insects. Do not position the device too close to other light sources. The darkest
place in the room to be protected is in general the most suitable. Position the device with some distance to humans and
foods in order to eliminate the possibility for insects to be able to come to close to them. When applying the device
close the doors and windows, if possible.
2. Do not position the device in front of an open window or an open door as the insects do not stay in the area of draught
air.
Switching on the device
After plugging the device into the socket outlet of your house installation press the switch (on the back side of the flying insect
exhauster) to „ON" in order to be able to put the device into operation.
Safety instructions
1. The device is nothing for children's hands. Therefore, keep it correspondingly.
2. Arrange, lay device in such manner where it is out of the reach of children.
3. The device is not suitable for the application in agricultural buildings as cots, barns etc. It is also not suitable for the
application in industrial companies as foods companies, butcheries etc.
4. The device is only suitable for the application in indoor rooms.
5. Before each connection of the device to the mains-operated check the electric supply line for damages. Damaged
electric supply lines must immediately be replaced by an expert repair shop in order to prevent dangers.
6. Never operate the device when it shows any damages.
7. Never use the device diverted from its intended use.
8. The device is not suitable for the application in rooms with easily inflammable liquids, explosive gases and dusts.
9. Never grasp into the device with any objects.
10. Never carry out any repair works on the device.
11. For the cleaning and care of the device observe unconditionally the notes of this instruction manual.
Attention: Not suitable for use in barn, stables and similar locations. (Fire danger)
Warning notices: Please note country-specific uses of flying insect killer. For reasons of environmental
protection the operation is prohibited open-air as productive insects could be killed.
Cleaning and care
Before being able to start the cleaning and care of the device the device must be disconnected from the mains-operated by
pulling the plug. For emptying the trapping net unscrew the spiral with the trapping net clockwise. Empty the trapping net by
shaking it out. Reinsert the spiral with the trapping net and retighten it by turning it anti-clockwise. Recommended to empty
the unit weekly.
Attention: Before emptying or cleaning respectively the device must be separated from the mains-
operated by pulling the mains plug. For reasons of electric safety never apply water or any
other liquids for the cleaning process. Only use a dry, lint-free cloth.
Instructions for Use
Flying insect exhauster
Article No. 62160