Automatic; Rds; Auxiliary Input; Radio - Lenco CS-351 Modo De Empleo

OPERATION OPERATION
OPERATION OPERATION
set the

radio

frequency or USA frequency.
4) HOUR 24/12
You can select time format to 12 hour or
24 hour format. (In AREA item. When you
change the radio frequency to the EUR.
The time format will be changed to 24
HOUR format automatically.
change the radio frequency to the USA.
The time format will be change to 12
HOUR format automatically.)
5) PCLK ON/OFF: no function.
AUXILIARY AUXILIARY AUXILIARY

AUXILIARY INPUT

INPUT INPUT INPUT
The unit can be connected to a portable
audio player through the AUX
on the front panel. After finishing the
connection, you can press MOD
on the front panel to switch the mode to
AUX IN mode.
RADIO OPERATION
RADIO RADIO RADIO OPERATION OPERATION OPERATION
SELECTING SELECTING SELECTING THE SELECTING THE THE THE FREQUENCY FREQUENCY FREQUENCY BAND FREQUENCY
At radio mode, press BND
shortly to select the desired band.
The reception band will change in the
following order:
FM1 / FM2 / FM3 / AM
SELECTING SELECTING STATION STATION
SELECTING STATION SELECTING STATION
Shortly press /
automatic seek function. Press for several
seconds until "MANUAL......" appears on
the display, the manual tuning mode is
selected. If both buttons have not been
pressed for several seconds, they will
return to seek
"AUTO......" appears on the display.

AUTOMATIC

AUTOMATIC AUTOMATIC AUTOMATIC MEMORY MEMORY MEMORY STORING MEMORY
PROGRAM

SCANNING

PROGRAM PROGRAM SCANNING PROGRAM SCANNING SCANNING
- Automatic memory storing
AS/PS AS/PS
Press AS/PS AS/PS button (20) for several
seconds "SEARCH" will appear on LCD.
the radio will search from the current
frequency and checks the signal
frequency to Europe
When you
AUX AUX AUX IN IN IN IN jack (30)
MOD MOD MOD button (5)
BAND BAND BAND
BND
BND BND button (24)
buttons (1) to activate
tuning mode
STORING STORING & & & & STORING
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
- Program scanning
Press A A A A S/PS S/PS
preset station. And the corresponding
station number P1~P6 will flash on LCD.
S S S S CAN CAN CAN CAN

SCAN

Press SCAN SCAN SCAN button (18) to enter scan
mode, the unit will scan to higher frequency
station and keep on each station for several
seconds (the corresponding frequency will
flash 5 times on LCD).
STATION

STATION STORING

STATION STATION STORING STORING STORING
Searched a station press preset button (1-6)
for several seconds (until 2'nd beeps come
out), current station is stored into the
number button.

RDS

RDS (RADIO (RADIO
RDS RDS (RADIO (RADIO
OPERATION OPERATION OPERATION OPERATION
- Setting RDS mode
Press AF AF AF AF button (21) and release
immediately to switch on or off RDS
mode.
Whenever RDS is switch on, "RDS" will
flash on LCD.
PT PTY Y Y Y BUTTON (17)
- USE PT PT
1) Shortly press PTY
enter
program name will be displayed on
the LCD, you can use
select the items and press
buttons (1) to begin search the
and
corresponding program.
2) Press and hold PTY
enter RDS MENU, in the menu, use
/
press
corresponding item.
There are below items for you to
adjusting:
10
S/PS
S/PS button (20) shortly to scan
DATA DATA
DATA DATA
PTY PTY
PTY button (17) will
PTY SELECT
PTY PTY
PTY button (17) will
(25) to select the items and
/ buttons (1) to adjust
SYSTEM) SYSTEM)
SYSTEM) SYSTEM)
mode, the
/ (25) to
/