Care & Cleaning; Cleaning The Juicer - Sage Big Squeeze BJS700 Guía Rápida

Care & Cleaning
Extract all the remaining pulp in the juicing bowl
before stopping the juicer.
For easier clean up, operate the juicer for
an additional 30 seconds after the juice is
extracted. Then fill the juicing bowl with water
and run the juicer before opening the drum lid.
When the drum lid is stuck, press the
REVERSE – OFF – FORWARD button in this
order, switching back and forth 2 to 3 times to
dislodge. Then place both hands on the drum
lid and firmly press down while simultaneously
turning the drum lid to open.

CLEANING THE JUICER

1. Switch OFF and unplug the power cord
from the wall outlet.
2. Turn the drum lid counter clockwise to open.
WARNING
When moving the appliance, do not lift by
grabbing the feeding tube. Always lift the
appliance by grabbing the body or handle.
3. Turn the top-set counter clockwise and lift
off the body.
10
4. Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
NOTE
Immediately clean the juicer after each use.
If remaining residue in the juicer dries up,
it can make disassembling and clean-up difficult.
The excess build up can cause poor performance
in future uses. For easier disassembly, place the
top-set in the sink and run the water through from
the top of the top-set.
We do not recommend to wash any parts of the
juicer in the dishwasher. Washing parts in the
dishwasher can cause damage to them due
to prolonged exposure to harsh detergents,
hot water and pressure.
5. Place the juicing bowl under running water
and unplug the compression silicone to clean
the pulp spout.