Care & Cleaning; Troubleshooting - Sage BCP600 Guía Rápida

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
Care & Cleaning
• Always ensure that the juicer is turned OFF at
the ON/OFF switch and the plug is removed from
the power outlet before cleaning, disassembling,
assembling and storing the appliance.
• Follow these instructions to clean all surfaces
or parts that come into contact with food
during juicing.
• For easy cleaning immediately after each use
rinse removable parts under warm water to
remove wet pulp. Allow parts to air dry before
reassembling.
• For thorough cleaning after disassembling the
appliance, all removable parts should be washed
in warm soapy water or on the top shelf of the
dishwasher. The base and juice press arm should
be wiped with a soft, damp cloth. All parts should
be dried thoroughly before reassembling.
• Store the cleaned and reassembled juicer in an
upright position in a cool, dry place. Do not place
any items on top of the juicer while stored.
NOTE
• Never immerse the motor base in water or any
other liquid. Do not use harsh abrasives.
Guarantee
2 YEAR LIMITED GUARANTEE
Sage Appliances guarantees this product for
domestic use in specified territories for 2 years
from the date of purchase against defects caused
by faulty workmanship and materials. During this
guarantee period Sage Appliances will repair,
replace, or refund any defective product (at the
sole discretion of Sage Appliances).

Troubleshooting

POSSIBLE
EASY SOLUTION
PROBLEM
Will not
• Switch not in the ON position
work
• Juice press arm not lowered
• Juicing cone or fruit dome
not assembled properly
• Filter not assembled properly
• Motor overload protection
may have operated
(see below)
Motor
• The juicer is fitted with an
Overload
overload protector to prevent
Protection
damage to the Motor.
If the Motor suddenly stops
working after heavy or long
periods of use, turn OFF
at the ON/OFF button, unplug
from the wall and allow the
unit to cool for 15 minutes.
Once the unit is cooled you
will be able to use the juicer
again as normal.
NOTE: The unit MUST be
unplugged from the supply
to allow the protector to reset.
• Despite this overload
protector we suggest juicing
in smaller batches in order
to protect the Motor.
All legal warranty rights under applicable
national legislation will be respected and will
not be impaired by our guarantee. For full terms
and conditions on the guarantee, as well as
instructions on how to make a claim, please visit
www.sageappliances.com.
EN
7
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Scp600

Tabla de contenido