NOTICE!
Risk of damage!
Covering the charger during the charging process may cause
the charger to overheat and damage the charger.
− Do not cover the charger during operation.
If you confuse the positive pole with the negative pole (reverse polarity) when
connecting the battery terminal clamps
will immediately light up. The charger will switch to standby mode
Charging the battery outside of the car
1. Connect the red battery terminal clamp
battery.
2. Connect the black battery terminal clamp
battery.
3. Connect the charger to the grid via the mains cord
Charging the battery in the vehicle
WARNING!
Risk of injury!
If the vehicle is in a faulty state when handling the charger and
battery, this may result in severe injury.
− If the battery is firmly mounted in the vehicle, make sure
that the vehicle is not running and is in a secured stand-
still. Switch the ignition off for this. Park the vehicle and
apply the parking brake for e.g. cars or use a rope for e.g.
electrical motor boats.
AFTER SALES SUPPORT
1 888 367 7373
USA
4
5
and
, the red error indicator
4
to the positive pole (+) of the
5
to the negative pole (+) of the
2
Operation
14
.
.
USA
13
17