First Use; Checking The Charger And Product Contents; Operation; Functionality Of The Charger - auto XS CPL-2054U Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

First use

Checking the charger and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage
the charger.
− For this reason, be very careful when opening it.
− Remove all protective films.
1. Take the charger out of the packaging and check whether the charger
or the individual parts exhibit damages. If this is the case, do not use the
charger. Contact the manufacturer at the service address specified on the
warranty card.
2. Check to make sure that the delivery is complete (see fig. A).

Operation

Functionality of the charger

The charger automatically recognizes the connected battery type, 6 V or 12 V
battery.
If the battery terminal clamps
verse polarity), the error display
heats or short circuits during operation, the error display will illuminate in red.
The charger switches to the standby mode
The charging process only starts when a charging program was selected with
the mode button
If a 6 V battery is connected, only the 6 V charging program
vated with the mode button. Other settings are not possible with this charging
program.
If the charger recognizes a connected 12 V battery, the mode button can be
used to select between the motorcycle
programs.
The selected charging program, the current battery voltage
level are shown during the charging process. As long as the charging process is ac-
tive, the frame around the battery symbol will blink on the display
AFTER SALES SUPPORT
1 888 367 7373
USA
4
and/or
13
6
.
5
are incorrectly connected (re-
will illuminate in red. If the charger over-
14
(see fig. C).
7
8
, car
and cold
First use
10
can be acti-
9
charging
15
and the charge
1
(see fig. E).
USA
13

Capítulos

Tabla de contenido
loading

Tabla de contenido