How To Produce Soft Ice Cream - Solera ECO Soft Manual De Uso Y Mantenimiento

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

To prepare the product mix use only drinkable water.

• Clean the machine as described in the previous paragraph.

• Remove the cover and pour the mix in the tank (max 4 liters - recommended 2,5/3 liters).

Warning: It is recommended to pour an already refrigerated product

• When you switch on the machine (page20 pos.F), the following menu will be displayed

SoftPremiumCream

Rev. XX

• Press the

key to start the augers rotation. The following menu is displayed

• To stop the augers press the

• If you press the

button, you can select "SOFT MODE", "NIGHT MODE" or return to the "MOTOR ON" condition in

which the augers rotate. According to the display setting you can see

SOFT MODE

WAIT PLEASE

• If you set "Soft mode" you will read "WAIT PLEASE" on the line below. This message indicates that the product is not

ready yet. In this condition the augers turn at 50rpm (default); this can be adjusted by changing the submenu

settings in the SERVICE section.

• To view the menu options, press the

• Use the

keys to find the TLI screen

• Press the

button to confirm and view the TLI temperature that has been set on the electronic control panel.

• If the product supplier has not provided clear instructions, using the

Press the

button to confirm.

• To exit the menu press the

• In this case, the electronic control unit will automatically seek the ideal temperature for the product in the tank.

Even if the machine is set to a TLI temperature of -8,5°C/16.7°F, this does not necessarily mean that the product

in the tank (see temperature on the TANK TEMPERAT. screen) will arrive at said temperature. As the electronic

module automatically searches for the ideal product temperature, the temperature registered on the TANK

TEMPERAT. display may be higher than that on the TLI screen; product temperatures may vary according to the

type of product used.