Safety Notes
• This car is to be used only with an operating system
designed for it (DC power = 18V±, Märklin AC, DCC,
Märklin Digital, Märklin Systems).
• Use only switched mode power supply units and
transformers that are designed for your local power
system.
• This car must never be supplied with power from
more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The LEDs in this item correspond to Laser Class 1
according to Standard EN 60825-1.
• WARNING! Sharp edges and points required for
operation.
6
Important Notes
• The operating instructions are a component part
of the product and must therefore be kept in a safe
place as well as included with the product, if the
latter is given to someone else.
• Disposing: www.maerklin.com/en/imprint.html
• Use only double-sided tape to cement figures in the
cars; do not use glues or cements!
Functions
• Interior lighting with maintenance-free LEDs
• The car has a 21-pin interface connector for instal-
lation of a digital decoder.
• The interior lighting is divided into different sections
that can be controlled individually after installation
of an appropriate decoder.