Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Wait until the start/stop button (2)
illuminates green.
•
Press the start/stop button (2) to start the
first rinsing cycle. If the water level indicator
(3) flashes, the first rinsing cycle is completed.
•
Repeat the above steps to run the second
rinsing cycle. If the second rinsing cycle is
completed, the appliance switches off
automatically.
•
If the process is completed, set the locking
collar (8) to position 'B'.
•
Remove the lid (19) from the water reservoir
(17).
•
Remove the cover (20) from the filter holder
(21).
•
Remove the red steam nozzle (27) from the
filter holder (21).
•
Tightly screw the red steam nozzle (27) to
the steam outlet (30).
•
Place the anti-chlorine filter (18) in the filter
holder (21).
•
Place the cover (20) on the filter holder (21).
Make sure that the arrow on the cover (20)
points in the direction as shown (fig. B).
•
Place the lid (19) on the water reservoir (17).
•
Place the water reservoir (17) in the appliance.
•
After descaling the appliance, clean the
coffee pad cassette (13), the milk frothing
unit and the coffee dispenser filter (28) in
soapy water using a soft brush.
Assembly
Before you proceed, we need you to pay
attention to the following notes:
-
Before assembly, always switch off the
appliance and remove the mains plug from
the wall socket.
Mounting the anti-chlorine filter
and the water reservoir (fig. A & B)
•
Place the anti-chlorine filter (18) in the filter
holder (21).
•
Place the cover (20) on the filter holder (21).
Make sure that the arrow on the cover (20)
points in the direction as shown (fig. B).
•
Place the lid (19) on the water reservoir (17).
•
Place the water reservoir (17) in the appliance.
Mounting the drip tray and the cup
tray (fig. N)
•
Place the drip tray (16) in the bottom of
the appliance.
•
Place the cup tray (15) above the drip tray
(16) in the bottom of the appliance.
Mounting the dispenser cassette and
the coffee dispenser filter (fig. K)
•
Mount the coffee dispenser filter (28) to
the dispenser cassette (9).
•
Mount the dispenser cassette (9) to the
appliance.
Mounting the coffee pad cassette
•
If you use coffee pads, refer to the section
"Making coffee with coffee pads".
•
If you use ground coffee, refer to the section
"Making coffee with ground coffee".
Mounting the milk frothing unit
(fig. J1 - J3)
Before you proceed, we need you to pay
attention to the following notes:
-
Push the tube adapter into the milk froth
dispenser adapter until it clicks into place
(fig. J2). If the tube adapter is not properly
mounted to the milk froth dispenser
adapter, milk and hot steam can escape
from the milk froth dispenser.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Be careful when handling the tube adapter
(25) to prevent damage to the air duct (A)
(fig. J3).
•
Slide the flexible tube (24) over the tube
adapter (25).
•
Push the tube adapter (25) into the milk
froth dispenser adapter (26) until it clicks
into place.
•
Mount the milk froth dispenser (12) to the
milk froth dispenser adapter (26).
•
Mount the milk froth dispenser adapter
(26) to the red steam nozzle (27).
29
Tabla de contenido
