Troubleshooting Guide - babymoov Yoo-See Instrucciones De Uso

Sound This icon allows you to choose the level of sensitivity of the camera's microphone.
sensitivity
Problems
The camera does not transmit.
The camera continuously
transmits.
The "out of range" alert does
not go off.
The low battery alert does not
come off.
Communication is frequently
interrupted.
The camera range is too short.
• Fréquency: 2400 MHz ~ 2483 MHz.
• Maximum output power. Camera: 17.5 dBm
• Rated input: 100 – 240 VAC, 50/60 Hz, 0.2 A
• Rated output: 5.0 V - 1 000 mA
Manufacturer: E-TEK Electronics Manufactory Ltd.
Model: ZD5C050100EUDW
Hardware version: V03
16
Choose this icon if you want to hear your baby only when making a loud noise.
Choose this icon if you want to hear your baby when making a medium noise.
Choose this icon if you want to hear your baby when making a quiet noise.

TROUBLESHOOTING GUIDE

Possible causes
• The microphone's sensitivity is too low.
• The microphone's sensitivity is too high.
• The camera transmits in continuous
transmission mode.
• The camera adapter is not plugged in.
• The camera and the receiver are too far apart.
• The connection between both appliances
has failed.
• Battery does not work.
• The camera is placed beside to other
electrical appliances.
• Both appliances are separated by metal
structures, excessively thick walls or several
obstacles between the two.
Receiver: 16.5 dBm
YOO-SEE BABYPHONE • Instructions for use
Solutions
• Increase the microphone sensitivity with
the button.
• Decrease the microphone sensitivity with
the button.
• Adjust the appliance so that it is enabled by the
sound of a voice by pressing on the
• Connect the power adapter to the camera.
• Bring the receiver close to the camera.
• Repeat the connection settings.
• Contact our customer support service.
• Remove the electrical appliances or move the
camera far from sources of interference or start the
connection settings again.
• Move the camera or receiver.
button.