Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A.
B.
C.
D.
E.
F.
CAPABILITIES
Will shred: Paper, plastic credit cards, CD/DVDs and staples
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above
Paper shred size:
Micro-Cut .................................................................... 5/64 in. x 1/2 in. (2mm x 12mm)
Card/CD shred size:
Strip-Cut .....................................................................................................1.5 in. (40mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
manual. Read the entire instruction manual before operating shredders.
to off or unplug when not in use.
openings. If object enters top opening, switch to Reverse (
Vapors from propellants and petroleum based lubricants may combust causing
serious injury
Do not place near or over heat source or water.
2
G.
H.
KEY
A. CD/card entry
B. See safety instructions
C. Paper entry
D. Pull-out bin
E. Window
F. Casters
G. ON/OFF switch
1. OFF
2. ON
Maximum:
Sheets per pass ............................................................................................................. 9*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width .............................................................................8-11/16 in. (220mm)
CD entry width .................................................................................4-13/16 in. (122mm)
* 8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 2.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Maximum recommended daily usage rates:
300 sheets per day; 25 credit cards; 10 CDs.
) to back out object.
H. Control Panel and LEDs
1. Overheat (red)
2. Remove paper (yellow)
3. ON/OFF and Bin open (green)
4. Reverse
5. Auto
6. Forward
9 sheets per pass to avoid jams.
action will stop shredder immediately.
transformers, or extension cords should not be used with this product.
ENGLISH
Model 450M
(I) position to
Tabla de contenido
