MODEL 1XGG3/9555
WARNING:
TEST GFCI PLUG BEFORE EACH USE.
1. PLUG GFCI INTO OUTLET. INDICATORS SHOULD TURN ON.
2. PRESS TEST BUTTON. INDICATORS SHOULD TURN OFF.
3. PRESS RESET BUTTON AGAIN FOR USE.
DO NOT USE IF ABOVE TEST FAILS.
CAUTION:
DO NOT USE WHERE WATER MAY ENTER CASE.
THIS PRODUCT IS FOR INDOOR USE ONLY WHEN USED WITH
UL LISTED, CSA CERTIFIED OR CUL APPROVED OUTPUT CORD
TYPE SO SERIES 14AWG/3C.
WARNING:
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
– DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
DESCRIPTION
The Air King® 7" (17,78cm) Pivoting Blower features 3-Speed operation
with a blower wheel fan blade. Fan has a permanently lubricated ball
bearing motor and a 10' (3,05 m) 14/3 cord set with a GFCI plug, and is
constructed of sturdy ABS plastic. Also features two 120 Volt courtesy
outlets protected by a 10 amp resettable breaker.
SPECIFICATIONS
Motor ...................................... 120V, 60 Hz
Blade diameter ....................... 7" Blower Wheel
Speeds .................................... 3
Control .................................... Rotary Switch
Air flow distribution ................ 225˚
Approvals ................................ ETL / CETL Listed
OPERATION
1. Carefully remove the Fan from the bag and the carton.
2. Place the Fan on a firm, level surface.
WARNING:
Plastic or rubber tabs, like the feet on this unit, may
stick to hardwood floors. The unit may leave a residue that could
darken, stain or leave permanent blemishes on the finish of certain
hardwood floors.
3. Plug the cord set into a 120 V~ electrical outlet. Be sure plug
fits tightly in outlet.
4. Turn the Fan on by selecting the desired speed with the Power
Knob on the side of the Fan. (Figure 1A)
0 - Off
3 - High
2 - Medium
1 - Low
5. To adjust the angle of the Fan air flow, rotate the Fan body
forward or backward to the desired position. (Figure 1)
6. To turn the Fan OFF, turn the Power Knob to OFF (0) and unplug
the unit from the electrical outlet.
Breaker Reset:
This is a safety feature of your Blower Fan. When you use a tool
that draws more amperage than allowed, the breaker will trip. To
reset, unplug the tool causing the breaker to trip and push the
Reset Button adjacent to the outlets on the Fan.
GFCI Reset:
The red indicator light on the GFCI plug should be lit during normal
operation. If Blower Fan DOES NOT operate when plugged into
a 120 Volt electrical outlet, press the reset button on the GFCI
plug.
Rev. D 7/08
MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING
OR SERVICING.
WARNING:
DO NOT IMMERSE FAN IN WATER!
CLEANING: Clean the Fan intake and exhaust openings with
the vacuum brush attachment on your vacuum cleaner. This will
remove dirt and lint that may accumulate over time. DO NOT AT-
TEMPT TO TAKE APART FAN. Clean the body of the Fan with a
soft cloth.
CAUTION:
Do not use gasoline, benzine, thinner, harsh clean-
ers, etc. as they may damage the Fan. NEVER use ALCOHOL
OR SOLVENTS.
SERVICING: All other servicing, with the exception of general
user maintenance, should be performed by an authorized service
representative.
STORAGE: Store the Fan, with these instructions, in the original
carton in a cool, dry place.
Figure 1A
Reset
Button
MODEL
1XGG3/9555
SPEED
HIGH
MED
LOW
CFM*
350
300
250
RPM
1440
1295
875
Amps
0.95
0.80
0.70
Watts
110
95
85
dBA
77
73
69
*
Tested in accordance with AMCA standard 230-99
2
MODEL / MODÈLE / MODELO 1XGG3/9555
Figure 1
9555AKEFS
Rev. D 7/08
NOTES / NOTAS
7
9555AKEFS
