Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.
ADAPTING THE GRILL TO ANOTHER GAS TYPE:
1.
Remove the front panel by unscrewing the screws. Unscrew the nozzle from the elbow. Replace the
nozzles in accordance with Table 4.1 or 4.5, taking into account the correct diameter for each gas
2.
Adjust the „H" position of the mixer sleeve in accordance with Table 4.1 or 4.5. tighten the locking
screw
3.
Adjusting the sparing flame on the main burner through the by-pass:
a. Remove the valve knob on the main panel
b. Remove by-pass and screw in a new one in accordance with Table 4.1 or 4.5
Change the pilot nozzle by unscrewing the Ø6mm tube from the pilot (note, in addition to the nozzle there
is also a sleeve). Replace nozzles according to Table 4.1 or 4.5.
Location of components
Burner nozzle
Position of adjusting sleeve/mixer
By-pass
- 67 -
By-pass position in the valve
Tabla de contenido
