Operating The Main Unit; Reception Of Radio Controlled Time Signal; Signal Reception Indicator; Time And Calendar Manual Setting - Oregon Scientific EW96 Manual Del Usario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

2. Signal reception indicator

3. Indoor temperature
4. Time
1
2
5. Alarm time & Date
3

OPERATING THE MAIN UNIT

1.
Remove the battery door and slide "UK/EU"
switch to select the desired country version.
2.
Insert 2 new AA size batteries as per the polarity
information
marked
compartment.
3.
Press "RESET" key to restart the clock.
4.
Slide "°C/°F" switch to select between Celsius
and Fahrenheit.
5.
Replace the battery door.

RECEPTION OF RADIO CONTROLLED TIME SIGNAL

The time and calendar are radio-controlled. The
current time and calendar are automatically
synchronized with time signal transmitted from
Germany/England.
When used for the first time (after inserting batteries
or pressing "RESET" key), the clock will start to
receive the time signals and the signal reception
indicator will be flashing for 5 minutes.
4
5
on
the
battery
4
SIGNAL RECEPTION INDICATOR
The wave segment flashing means time signals are
being received. The signal quality could be classified
into 3 types:
No signal
Weak signal
Note
1.
The unit will automatically search for the time
signal at 2:00 (3:00 or 4:00 is also available if
the signal is not received at 2:00), 8:00, 14:00
and 20:00 each day.
2.
Always place the unit away from interfering
sources such as TV set, computer, etc.
3.
Avoid placing the unit on or next to metal
plates.
4.
Closed area such as airport, basement, tower
block or factory is not recommended.
5.
Do not start reception in moving articles such
as vehicles or trains.

TIME AND CALENDAR MANUAL SETTING

If you are out of reach of the Radio Controlled
sensor or if the reception is not reachable, the time
Excellent signal
Tabla de contenido
loading

Tabla de contenido