Bar Chart; Alarm; Memory; Max / Min Records - Oregon Scientific WMR200 Manual Del Usuario

Wa ing ibbous

BAR CHART

To select chart display mode:
Press bar chart area to toggle between these chart displays
aro eter
ain

ALARM

Weather alarms are used to alert you of certain weather conditions. Once activated,
the alarm will turn off when a certain criterion is met.
Area Type of alarm
Barometer Barometer
Rain Rain rate
UV UV

Temperature

Current Temperature
eat nde
Humidity Current Humidity
Dew Point
Clock Daily Alarm
Wind Gust Wind Speed
Low Wind Chill
To set the alarm:
1. Press desired area to activate.
2. Press AL to display Time and HI / LO alarm.
3. Press and hold AL
4. Press UP / DWN to set the desired values.
5. Press
AL to confir and continue to ne t setting O
touch anywhere on the screen e cept tool bar
confir and e it
To enable / disable alarms:
1. Press desired area to activate.
2. Press AL to display set Time and HI / LO alarm.
3. Press AL ON/OFF to turn alarm ON / OFF.
"- -" indicates alarm is not set / disabled.
NOTE Clock alarm sound is different from weather alarms to allow for easy
differentiation by user.
To silence any alarm: Press anywhere on the screen.
NOTE will continue ashing, despite silenced alar , for at least
until condition ceases.
NOTE When alarm is on, the channel of triggered alarm will be displayed.

MEMORY

MAX / MIN RECORDS

Area Type of Memory
Temperature Current Temperature
eat nde
Humidity Current Humidity
Dew Point
Wind Gust Wind Speed
Wind Chill
To view MAX / MIN records:
1. Press desired area to activate.
2. Press MEM to toggle between MIN / MAX recorded values.
To clear individual area records:
1. Press desired area to activate.
2. Press and hold MEM.
3. Delete process is complete when display shows current reading.

HOURLY RECORDS

Waning Crescent
Display
Barometer
Hourly Rainfall
UV
To view hourly records:
1. Press desired area to activate.
2. Press UP / DWN to view current (0) / hourly reading.
When MAX / MIN reading is displayed, the corresponding timestamp will be
displayed in the clock area

DATA LOGGER

To set DATA LOGGER:
1. Press clock area
HI
2. Press SET.
HI
3. Press UP / DWN to select frequency of data recording (1 / 2 / 5 / 10 /15).
4. Press SET.
HI
5. The number of days memory will allow for records will be displayed.
HI
LO
Frequency in minutes
HI
1
HI
2
LO
5
HI
10
LO
15
HI
* based only on all provided sensors in this package being used, and after all memory
has been cleared.
LO
To view remaining days for records:
Press clock area
NOTE When DATA LOGGER is full, i.e., no more records can be stored on unit,
'DATA LOGGER' and 'O Days will ash
weather forecast area to

SET UP SOFTWARE (FIRST TIME USE)

The weather station is capable of connecting to a PC computer using the USB
connection. The software can read the latest weather data collected from the base
station.
PC system requirements
The minimum system requirements for use of the software is:
inutes or

ADDITIONAL STEP FOR WINDOWS VISTA USERS ONLY

* For Windows XP users, please go straight to Install Software section.
IMPORTANT You must follow the below instructions before installing software.
Determine status of UAC (User Account Control):
1. Click on
3. Double click the User Account (and Family Safety).
MAX
4. Double click on Change your Windows password. (If you chose the Control
MIN
MAX
5. In Turn User Account On or Off screen, identify if UAC option is enabled / on
MIN
MAX
NOTE We highly recommend disabling this option for seamless operation of
MIN
the Weather OS software.
MAX
MIN To Turn User Account off:
MAX
MIN
7. Click OK.
8. In You must restart your computer dialogue bo , click Restart now.

INSTALL SOFTWARE

1. Insert provided CD into disk drive.
2. Run CD software.
3. Setup Wizard dialogue bo will appear and guide you through the installation
9
.
until DATA LOGGER mode is displayed.
No. of days available for data logging with Memory
available*
19
38
97
194
291
until DATA LOGGER mode is displayed.
Operating syste icrosoft Windows P SP or ista
Processor Pentiu or abo e
in
ard disk free space in
Screen isplay rea pi els reco
Start.
n conte t enu, scroll to Settings and select Control Panel.
Panel classic link from left hand column in step 2, skip this step).
(ticked) or disabled / off (un-ticked).
eselect the option by un-ticking the bo
process.
Hourly readings of up to
24 hours back
24 hours back
10 hours back
ended
click once